screen_cast/scripts/install-receiver.sh

#!/usr/bin/env bash
#
# install-receiver.sh — build and install the screencast RECEIVER on a
# small ARM board (e.g. a Raspberry Pi Zero 2 W).
#
# Why a separate script: the sender pulls in PipeWire and the
# xdg-desktop-portal capture stack, which a headless receiver board neither
# has nor needs. This script configures the build with -Dsender=false so
# only the receiver binary is compiled.
#
# Usage (from the repository root, on the target machine):
#
#   sudo ./scripts/install-receiver.sh
#
# Environment overrides:
#   SC_RECEIVER_INSTALL_DIR   install target (default /usr/local/bin)
#   SC_RECEIVER_SKIP_TESTS    set to 1 to skip the test suite (faster install)
#   SC_RECEIVER_SERVICE       set to 0 to skip the systemd service setup
#
# Requirements:
#   - Debian/Raspberry Pi OS (apt) with GCC 13 or newer (the code uses
#     C++20 <format>; Raspberry Pi OS Trixie or newer ships a suitable GCC)
#   - a running avahi-daemon (installed and enabled by this script)
#   - a graphical session or KMS console for the receiver window

set -euo pipefail

REPO_ROOT="$(cd "$(dirname "${BASH_SOURCE[0]}")/.." && pwd)"
BUILD_DIR="${REPO_ROOT}/build-receiver"
INSTALL_DIR="${SC_RECEIVER_INSTALL_DIR:-/usr/local/bin}"
SKIP_TESTS="${SC_RECEIVER_SKIP_TESTS:-0}"
ENABLE_SERVICE="${SC_RECEIVER_SERVICE:-1}"

log() { printf '\n=== %s\n' "$*"; }
die() { printf 'install-receiver: error: %s\n' "$*" >&2; exit 1; }

TEMP_SWAP=""
SDL_DIR=""
cleanup() {
    if [ -n "${TEMP_SWAP}" ]; then
        swapoff "${TEMP_SWAP}" 2>/dev/null || true
        rm -f "${TEMP_SWAP}"
    fi
    if [ -n "${SDL_DIR}" ]; then
        rm -rf "${SDL_DIR}"
    fi
}
trap cleanup EXIT

[ "$(id -u)" = 0 ] || die "run with sudo (installs to ${INSTALL_DIR})"
[ -f "${REPO_ROOT}/meson.build" ] || die "run from the screen_cast repository"
command -v apt-get >/dev/null 2>&1 || die "this script supports apt-based systems only"

export DEBIAN_FRONTEND=noninteractive

# --- build and runtime dependencies -----------------------------------------
log "installing build and runtime dependencies (this may take a while)"
apt-get update -qq || apt-get update
apt-get install -y --no-install-recommends \
    build-essential \
    meson \
    ninja-build \
    pkg-config \
    libavcodec-dev \
    libavutil-dev \
    libswscale-dev \
    nlohmann-json3-dev \
    libavahi-client-dev \
    avahi-daemon \
    ca-certificates

# The receiver renders with SDL3. Older releases do not package it; build a
# minimal SDL3 from source in that case.
if ! apt-get install -y --no-install-recommends libsdl3-dev; then
    log "libsdl3-dev is not packaged; building SDL3 from source (15-30 min on small boards)"
    apt-get install -y --no-install-recommends cmake git
    SDL_DIR="$(mktemp -d)"
    git clone --depth 1 --branch release-3.2.x \
        https://github.com/libsdl-org/SDL.git "${SDL_DIR}/SDL"
    cmake -S "${SDL_DIR}/SDL" -B "${SDL_DIR}/build" \
        -DCMAKE_BUILD_TYPE=Release \
        -DSDL_TESTS=OFF \
        -DSDL_INSTALL_DOCS=OFF \
        -DSDL_EXAMPLES=OFF
    cmake --build "${SDL_DIR}/build" --parallel "$(nproc)"
    cmake --install "${SDL_DIR}/build"
fi

# --- compiler sanity check ---------------------------------------------------
log "checking the compiler for C++20 <format> support"
if ! printf '#include <format>\nint main() { return 0; }\n' |
    g++ -std=c++20 -x c++ - -o /dev/null 2>/dev/null; then
    die "g++ lacks C++20 <format>; install GCC 13 or newer (Raspberry Pi OS \
Trixie or newer ships one). Aborting before a long build."
fi

# --- memory-constrained boards ----------------------------------------------
# The signaling unit includes nlohmann/json.hpp, which can peak well above
# the RAM of small boards; the OOM killer then terminates the compiler
# ("Killed signal terminated program cc1plus"). Give such boards temporary
# swap and a single compile job.
BUILD_JOBS="$(nproc)"
MEM_TOTAL_KB="$(awk '/^MemTotal:/ {print $2}' /proc/meminfo)"
if [ "${MEM_TOTAL_KB}" -lt 1500000 ]; then
    SWAP_TOTAL_KB="$(awk '/^SwapTotal:/ {print $2}' /proc/meminfo)"
    if [ "${SWAP_TOTAL_KB}" -lt 1000000 ]; then
        FREE_KB="$(df -k --output=avail / | awk 'NR==2 {print $1}')"
        if [ "${FREE_KB}" -lt 1572864 ]; then
            die "board has little RAM and not enough free disk for 1 GB of temporary build swap; build on a larger machine or add swap manually"
        fi
        log "low-memory board: adding 1 GB of temporary swap for the build (removed afterwards)"
        TEMP_SWAP="/var/tmp/screencast-build.swap"
        if ! (fallocate -l 1G "${TEMP_SWAP}" 2>/dev/null ||
              dd if=/dev/zero of="${TEMP_SWAP}" bs=1M count=1024 status=none); then
            die "failed to write the swapfile"
        fi
        chmod 600 "${TEMP_SWAP}"
        if ! mkswap "${TEMP_SWAP}" >/dev/null 2>&1 || ! swapon "${TEMP_SWAP}" 2>/dev/null; then
            # Some filesystems (e.g. btrfs) refuse swapfiles outright.
            rm -f "${TEMP_SWAP}"
            TEMP_SWAP=""
            log "WARNING: could not activate a swapfile on this filesystem; continuing with a single compile job — the build may still run out of memory"
        fi
    fi
    BUILD_JOBS=1
    log "low-memory board: compiling with a single job"
fi

# --- build the receiver ------------------------------------------------------
log "configuring a receiver-only build in ${BUILD_DIR}"
rm -rf "${BUILD_DIR}"
meson setup "${BUILD_DIR}" "${REPO_ROOT}" -Dsender=false

log "compiling (this takes a while on small boards)"
meson compile -C "${BUILD_DIR}" --jobs "${BUILD_JOBS}"

if [ "${SKIP_TESTS}" != "1" ]; then
    log "running the test suite"
    meson test -C "${BUILD_DIR}" --print-errorlogs
fi

# --- install -----------------------------------------------------------------
log "installing the receiver to ${INSTALL_DIR}"
install -m 755 "${BUILD_DIR}/src/app/screencast" "${INSTALL_DIR}/screencast"

systemctl enable --now avahi-daemon 2>/dev/null || true

# --- systemd autostart --------------------------------------------------------
if [ "${ENABLE_SERVICE}" = "1" ] && command -v systemctl >/dev/null 2>&1; then
    log "installing the systemd service (autostart on boot)"
    RUN_USER="${SUDO_USER:-root}"

    # Headless KMSDRM rendering needs device access; skip groups that do
    # not exist on this system.
    if [ "${RUN_USER}" != "root" ] && id "${RUN_USER}" >/dev/null 2>&1; then
        for group in video render input; do
            if getent group "${group}" >/dev/null 2>&1; then
                usermod -aG "${group}" "${RUN_USER}" || true
            fi
        done
    fi

    sed -e "s|__SC_RECEIVER_BIN__|${INSTALL_DIR}/screencast|g" \
        -e "s|__SC_RECEIVER_USER__|${RUN_USER}|g" \
        "${REPO_ROOT}/systemd/screencast-receiver.service" \
        > /etc/systemd/system/screencast-receiver.service
    chmod 644 /etc/systemd/system/screencast-receiver.service
    systemctl daemon-reload
    systemctl enable --now screencast-receiver.service
else
    log "skipping the systemd service (disabled or systemd not available)"
fi

log "done."
cat <<'EOF'

The receiver is installed and starts automatically at boot.

    systemctl status  screencast-receiver   # is it running?
    journalctl -u screencast-receiver -f    # follow its logs
    sudo systemctl stop screencast-receiver    # stop gracefully (Ctrl-C like)
    sudo systemctl disable --now screencast-receiver   # turn autostart off

Notes for small boards (e.g. Pi Zero 2 W):
  - No window manager is required: the receiver renders directly to the
    kernel display pipeline (SDL KMSDRM). Use Raspberry Pi OS Lite with
    NO desktop enabled — a running compositor would own the display and
    the receiver could not start. No console autologin is needed either.
  - The service owns tty7 and switches to it at boot (Ctrl+Alt+F1 returns
    to the console login, Ctrl+Alt+F7 to the screencast).
  - Disable console blanking so the picture never goes dark: add
    consoleblank=0 to /boot/firmware/cmdline.txt and reboot.
  - Decoding is software H.264; expect smooth playback for small streams
    and a lower frame rate at high resolutions.
  - Stop the receiver via systemctl (never kill -9; stale mDNS records
    would break discovery for ~75 minutes).
  - On a desktop session instead, edit the installed service file and
    uncomment the Environment lines for XDG_RUNTIME_DIR/WAYLAND_DISPLAY.
  - avahi-daemon must stay enabled; it is what senders discover.
EOF